Browse by Category
- Education – Training
- Chemicals
- Antimicrobials, Disinfectants and Sanitizers
- Mold Encapsulants and Coatings
- Fire, Soot and Smoke
- HVAC Cleaners and Coatings
- Carpet Cleaning
- Tile and Grout Cleaning and Sealing
- Spot and Stain Removers
- Upholstery
- Odor Control, Remover and Sealers
- Oriental Rug Cleaning Chemicals
- Leather Cleaning
- Natural Stone Care
- VCT Floor Care
- Equipment
- Carpet Cleaning Equipment
- Vacuum Cleaners
- Natural Stone Cleaning
- Tile and Grout
- Floor Cleaning Equipment
- Carpet Repair and Reinstallation
- Wood Floor Equipment
- Dehumidifiers and Desiccants
- Demolition Tools & Accessories
- Flood and Water Extraction
- Negative Air and HEPA Air Scrubbers
- Airmovers and Blowers
- Fire, Smoke and Odor Equipment
- Meters and Testing Tools
- Thermal Imaging
- Wall Cavity Drying and Floor Drying
- Specialty Heat Drying and Air Conditioning
- Power Distribution
- Pressure Washers and Tools
- Parts
- Accessories and Supplies
- Hoses and Accessories
- Foam Blocks, Tabs and Corner Guards
- Carpet Grooming, Brushes and Rakes
- Buckets, Bottles and Containers
- Holders: Bottles/Tabs/Blocks
- Brushes, Brooms, Bonnets and Encap Pads
- Floor Pads
- Tape
- Trash Bags and Liners
- Layflat and Reinforced Ducting
- Poly Sheeting
- Filters (all types)
- Fire and Smoke Accessories
- Safety and PPE
- Storm and Pack-Out Supplies
- Rags, Towels, Sponges and Wipes
- Extension Poles and Handles
- Stone Restoration Products
- Concrete Polishing Supplies
- Safety and PPE
- Janitorial
- Shop by Brand
- Rental Equipment
- Financing
Recently Viewed Products
MR-160 Imaging Moisture Meter with IGM by FLIR
FLIR MR-160 Moisture Meter
Featuring Infrared Guided Measurement (IGM), the MR160 helps you quickly target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. The MR160 can serve as your go-to troubleshooting tool right out of the box or as the perfect complement to any high resolution thermal camera you already own.
TROUBLESHOOT QUICKLY
Easily investigate insulation and moisture issues using MR160's pinless technology or external pin probe for both non-destructive and contact measurements.
IDENTIFY AND VERIFY MOISTURE
Use the built-in thermal image camera to locate areas of moisture. Verify the moisture level using pin and pinless moisture measurement.
PORTABLE, TOUGH, DURABLE
Rugged design, small form factor, and internal rechargeable battery for convenience to carry with you.
OVERVIEW
- Agency Approvals
- FCC class B, CE, UL
- Dimensions (H x W x L)
- QVGA (320 x 240 pixel) 2.3" 64k color TFT
- Laser Orientation
- Single laser pointer to center of thermal image
- Packaging Size
- 12.1 cm x 14 cm x 33.1 cm
- Warranty
- 2 Yr Product, 10 Yr Thermal detector**
ENVIRONMENTAL
- Drop test
- 9.8’ (3m)
IMAGING & OPTICAL
- Image Display
- Color moisture alert
- Minimum Focus Distance
- 10cm (4")
- Spectral Response
- 8–14µm
- Thermal Image Resolution
- 4800 pixels (80 × 60)
- Thermal Imaging Detector
- FLIR Lepton® microbolometer
- Field of View [W x H]
- 51° × 38°
MEASUREMENT & ANALYSIS
- Image Calibration
- Automatic
- Image Frame Rate
- 9 Hz
- Measurement Resolution
- 0.1
- Pin Moisture Groups
- 9 material groups
- Pin Moisture via Ext Probe Range [Accuracy]
- 0–100% WME (± 5%)
- Pinless Measurement Depth
- 0.75" (19mm) Max
- Pinless Moisture Range
- 0–100 relative measurement
- Response Time Pin Mode
- 750ms
- Response Time Pinless
- 100ms
- Thermal Sensitivity
- <0.15°C
OTHER
- Certification Standards
- EN61326 (EMC), EN61010 (battery + charger), EN60825-1 class 2 (Laser)
POWER
- Battery
- 3.7 V, 3000 mAh Li-ion rechargeable via micro USB
- Power Requirements
- Integrated rechargable battery
- Battery power\Cont Run Time
- 18 hours max
- Battery power-Typical Usage
- 4 work weeks
STORAGE MEDIA
- Saved Image File format
- BMP with measurement values overlaid
- Stored Image Capacity
- 9999 images
CONTRACTOR PRICING
We always strive to offer the most competitive pricing in the industry. Excel pride's ourselves on our ability to meet demand, product availability, service and support, and competitive pricing. If you are buying in bulk we offer competitive pricing to meet your needs. You can reach out to any of our commercial sales leaders by calling 800.909.3590.