DriTec® 4000i Desiccant

The new DriTec 4000i from Dri-Eaz is the most versatile desiccant available on the market today. Its smart controls allow you to set minimum and maximum humidity levels to eliminate concerns about overdrying – no other desiccants offer this feature!

The 4000i also features intelligent controls that automatically optimize performance across all conditions and a display that shows water removal and system messages in real-time. The rugged steel case includes onboard storage for accessories – all in a housing that is 33% smaller than the closest competitor. You can even operate the DriTec on its back for use in crawlspaces. For the smartest and most portable desiccant drying, choose the DriTec 4000i.

Specifications:

• Water removal (at 80°F/60%RH): 118 pts./day | 55.8 L per/day
• Process Air: 395 CFM
• Reactivation Air: 65 CFM
• Dimensions (W × H × D):
  21.14 × 33.13 × 20.25 in. (with handle upright = 42. 250 in.)
  53.7 × 84.15 × 51.4 cm (with handle upright = 107.3 cm.)
• Weight: 95 lbs. | 43.1 kg
• Volts: 115V
• Frequency: 60 Hz
• Amps (at 80°F/60%RH):
  Circuit 1: 12
  Circuit 2: 12
• Air filter: 4-PRO filter
• Safety: ETL listed to CSA dehumidifier standards
• Xactimate: WTRDHM

Product Features

• Smart controls deliver optimized performance
• Onboard min/max humidistat controls and pints-per-day display
• 33% smaller than the closest competitor
• Equipped with Positive Thermal Coefficient heaters for better efficiency, safety, and longer life
• Sturdy and highly portable – even works on its back for low-clearance areas
• Rugged vacuum-molded back protects the unit for loading and transport
• The built-in compartment provides storage for power cords and ducting
• Handy on-unit guide for ducting setup

• Reactivation Out duct ring
• Reactivation Out heat-resistant ducting
• Air inlet duct ring
• Process air outlet adaptor assembly
• Two power cords, 25 ft. each

VIDEO